AMS500 Negative Pressure Unit
SKU:
A$275.00
A$275.00
per item
The AMS 500 Negative Pressure Unit is made from durable polypropylene. The AMS 500 Negative Pressure Unit is a robust, yet lightweight unit, designed specifically for small enclosures. Conforms to BS 8520-2:2009
The AMS 500 produces an approximate airflow of 625 m3/h nominal and should typically correspond to the volume of a 100 m3 enclosure with 99.995% filtration.
All AMS 500 Negative Pressure units are supplied with individual assembled appliance DOP test certificate stating airflow and filtration efficiency results.
Asbestos exposure can cause severe and fatal diseases. Approved Code of Practices should be applied at all times when using this equipment to ensure safe working conditions.
AMS 500 NEGATIVE PRESSURE UNIT TECHNICIAL SPECIFICATIONS
The AMS 500 produces an approximate airflow of 625 m3/h nominal and should typically correspond to the volume of a 100 m3 enclosure with 99.995% filtration.
All AMS 500 Negative Pressure units are supplied with individual assembled appliance DOP test certificate stating airflow and filtration efficiency results.
Asbestos exposure can cause severe and fatal diseases. Approved Code of Practices should be applied at all times when using this equipment to ensure safe working conditions.
AMS 500 NEGATIVE PRESSURE UNIT TECHNICIAL SPECIFICATIONS
- Supply Voltage 230v @ 50Hz
- Current 1.2A
- Motor Output 273w
- RPM 2110
- Temperature Range -20 to +40 0 C
- Controls: On/Off Switch and Speed Control
- Protection: Inbuilt thermal cut-out with automatic reset
- Air Flow rate (H14 HEPA FILTER) 625m3/ hour
- Dimensions: Height 432 mm, Width 380 mm, Length 380 mm
- Weight: 17kg
- Pre-filter Size: 292 mm x 292 mm x 47 mm
- Pre-filter Efficiency: EU4
- HEPA Filter Size: 305 mm x 305 mm x 117 mm
- HEPA Filter Efficiency (H14): 99.995%
- Ducting Connection Size: 170 mm diameter
Sold Out
|
|
|
AMS500 Negative Pressure Unit Hire Available Australia Wide
|